AMP 05-3P Flat Lip

2-Piece Wheels

WHEEL SPECIFICATIONS

Sizing Availability

Diameter

18-24 inches

Width

Offset

REQUEST A QUOTE

WHEEL OPTIONS / FEATURES

Wheel Face Profiles

2-PIECE FORGED WHEELS COLLECTION

2- Piece forged wheels are pretty much manufactured the same as the Monoblock forged wheels except that they are mashiened out of 2 separate pieces which are then bolted together. A 2-piece wheel in this configuration pretty much looks like a Monoblock Wheel but with exposed Hardware (showing Bolts) If you do not want the bolts to be seen it is also possible to make them with non exposed hardware so the bolts will not be visible. So there is no lip! Now the question is, why a 2 piece wheel? Mostly because with a 2 piece wheel in some applications you can run a more concave profile. On some applications, not on all applications. Its also easier to have 2 tone finishes.

3-PIECE WHEELS

3-Piece Forged wheels can use many different methods of manufacturing. Centers can be cast in various methods or forged. The rim sections for 3 piece wheels are normally spun from disks of aluminum. Generally, spun rim sections offer the ability to custom-tailor wheels for special applications that would not be available otherwise, for example widebody applications. The rim sections are bolted to the center and normally a sealant is applied in or on the assembly area to seal the wheel. This type of 3-piece construction was originally developed for racing in the early 1970s and has been used on cars ever since. Three piece forged wheels are usually the most expensive wheel construction, mostly due to the assembly labor and components used. The wheels consist of three main pieces; the center, the outer barrel (lip), and the inner barrel. These three parts are held together with a series of perimeter bolts. Silicone RTV is used to seal between the two hoops.